Injectables From Powder

Test
Enanthate 5 grams conversion

Needed

5 grams test E

Benzyl Alcohol 1ml 5% BA

15.25 ml sesame oil

Syringes 3cc & 5/10cc

18 or 20 guage Needles

Vial

Sterile Vial

Whatman sterile filter

1. Weigh out 5 grams of powder.

2. Place powder in vial.

3. Add BA to the vial.

4. Heat oil in the oven to help sterilize it, heat to at least 212 degrees F. I
usually heat my oil at 275 to be sure, I put the oil in a muffin pan, just fill
one of the indentions this is plenty for these experiments. Also heat more oil
than you need, as you will not be able to get it all out of the pan.

5. Add oil to the vial, save 2 ml of oil in the Syringe for later. Gently shake
vial.

6. Heat mixture if necessary. I like heating my powder products, by placing the
vial in a frying pan, and placing it on the eye of the stove.

7. Place a 18 or 20 gauge needle in the sterile vial attach whatman sterile
filter.

8. Place another needle in the sterile vial to relieve the pressure.

9. Draw out solution with a Syringe, run though whatman filter.

10. Take other Syringe with 2ml oil, run through whatman into solution.

Makes 20ml @ 250mg/ml


Test Enanthate 10 gram conversion

Needed

10 grams test E

Benzyl Alcahol 2ml 5% BA

30.5 ml sesame oil

Syringes 3cc & 5/10cc

18 or 20 guage Needles

Vial

Sterile Vial

Whatman sterile filter

1. Weigh out 10 grams of powder.

2. Place powder in vial.

3. Add BA to the vial.

4. Heat oil in the oven to help sterilize it, heat to at
least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in
a muffin pan, just fill one of the indentions this is plenty for these
experiments. Also heat more oil than you need, as you will not be able to get
it all out of the pan.

5. Add oil to the vial, save 2 ml of oil in the Syringe
for later. Gently shake vial.

6. Heat mixture if necessary. I like heating my powder
products, by placing the vial in a frying pan, and placing it on the eye of the
stove.

7. Place a 18 or 20 gauge needle in the sterile vial
attach whatman sterile filter.

8. Place another needle in the sterile vial to relieve the
pressure.

9. Draw out solution with a Syringe, run though whatman
filter.

10. Take other Syringe with 2ml oil, run through whatman
into solution.

Makes 40ml @ 250mg/ml

Test Cypionate 5 gram conversion

Needed

5 grams test c

Benzyl Alcahol 1ml 5% BA

15.25 ml sesame oil

Syringes 3cc & 5/10cc

18 or 20 guage Needles

Vial

Sterile Vial

Whatman sterile filter

1. Weigh out 5 grams of powder.

2. Place powder in vial.

3. Add BA to the vial.

4. Heat oil in the oven to help sterilize it, heat to at
least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in
a muffin pan, just fill one of the indentions this is plenty for these
experiments. Also heat more oil than you need, as you will not be able to get
it all out of the pan.

5. Add oil to the vial, save 2 ml of oil in the Syringe
for later. Gently shake vial.

6. Heat mixture if necessary. I like heating my powder
products, by placing the vial in a frying pan, and placing it on the eye of the
stove.

7. Place a 18 or 20 gauge needle in the sterile vial
attach whatman sterile filter.

8. Place another needle in the sterile vial to relieve the
pressure.

9. Draw out solution with a Syringe, run though whatman
filter.

10. Take other Syringe with 2ml oil, run through whatman
into solution.

Makes 20ml @ 250mg/ml

Test Cypionate 10 gram conversion

Needed

10 grams test c

Benzyl Alcahol 2ml 5% BA

30.5 ml sesame oil

Syringes 3cc & 5/10cc

18 or 20 guage Needles

Vial

Sterile Vial

Whatman sterile filter

1. Weigh out 10 grams of powder.

2. Place powder in vial.

3. Add BA to the vial.

4. Heat oil in the oven to help sterilize it, heat to at
least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in
a muffin pan, just fill one of the indentions this is plenty for these
experiments. Also heat more oil than you need, as you will not be able to get
it all out of the pan.

5. Add oil to the vial, save 2 ml of oil in the Syringe
for later. Gently shake vial.

6. Heat mixture if necessary. I like heating my powder
products, by placing the vial in a frying pan, and placing it on the eye of the
stove.

7. Place a 18 or 20 gauge needle in the sterile vial
attach whatman sterile filter.

8. Place another needle in the sterile vial to relieve the
pressure.

9. Draw out solution with a Syringe, run though whatman
filter.

10. Take other Syringe with 2ml oil, run through whatman
into solution.

Makes 40ml @ 250mg/ml

EQ for 5 grams of powder (eq is actually liquid at room
temp.)

5 grams EQ

20.50 ml oil

.75 ba 3% BA

Syringes

Vial

Sterile Vial

Whatman sterile filter

1. Weigh out 5 grams of powder.

2. Place powder in vial.

3. Add BA to the vial.

4. Heat oil in the oven to help sterilize it, heat to at
least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in
a muffin pan, just fill one of the indentions this is plenty for these
experiments. Also heat more oil than you need, as you will not be able to get
it all out of the pan.

5. Add oil to the vial, save 2 ml of oil in the Syringe
for later. Gently shake vial.

6. Heat mixture if necessary. I like heating my powder
products, by placing the vial in a frying pan, and placing it on the eye of the
stove.

7. Place a 18 or 20 gauge needle in the sterile vial
attach whatman sterile filter.

8. Place another needle in the sterile vial to relieve the
pressure.

9. Draw out solution with a Syringe, run though whatman
filter.

10. Take other Syringe with 2ml oil, run through whatman
into solution.

Makes 25ml @ 200mg/ml

1 ml of EQ is 1.18 grams

Grams * 0.85 = ml of Bold Undec to use.

EQ is virtually idiot proof, so I would recommend making
all of your product in one sitting if you have more than 5 or 10 grams of EQ,
instead of trying to weigh out 5 or 10 grams of it

EQ for 10 grams of powder (eq is actually liquid at
room temp.)

10 grams EQ

41 ml oil

1.5 ba 3% BA

Syringes

Vial

Sterile Vial

Whatman sterile filter

1. Weigh out 10 grams of powder.

2. Place powder in vial.

3. Add BA to the vial.

4. Heat oil in the oven to help sterilize it, heat to at
least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in
a muffin pan, just fill one of the indentions this is plenty for these
experiments. Also heat more oil than you need, as you will not be able to get
it all out of the pan.

5. Add oil to the vial, save 2 ml of oil in the Syringe
for later. Gently shake vial.

6. Heat mixture if necessary. I like heating my powder
products, by placing the vial in a frying pan, and placing it on the eye of the
stove.

7. Place a 18 or 20 gauge needle in the sterile vial
attach whatman sterile filter.

8. Place another needle in the sterile vial to relieve the
pressure.

9. Draw out solution with a Syringe, run though whatman
filter.

10. Take other Syringe with 2ml oil, run through whatman
into solution.

Makes 50ml @ 200mg/ml

1 ml of EQ is 1.18 grams

Grams * 0.85 = ml of Bold Undec to use.

EQ is virtually idiot proof, so I would recommend making
all of your product in one sitting if you have more than 5 or 10 grams of EQ,
instead of trying to weigh out 5 or 10 grams of it

Test Prop for 5 grams

5 grams powder

36.25 ml sesame oil

2.5ml Benzyl AlcoholA 5%

7.5ml Benzyl Benzoate 15%

Syringes

Vial

Sterile Vial

Whatman sterile filter

1. Weigh out 5 grams of powder.

2. Place powder in vial.

3. Add BA & BB to the vial.

4. Heat oil in the oven to help sterilize it, heat to at
least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in
a muffin pan, just fill one of the indentions this is plenty for these
experiments. Also heat more oil than you need, as you will not be able to get
it all out of the pan.

5. Add oil to the vial, save 2 ml of oil in the Syringe
for later. Gently shake vial.

6. Heat mixture if necessary. I like heating my powder
products, by placing the vial in a frying pan, and placing it on the eye of the
stove.

7. Place a 18 or 20 gauge needle in the sterile vial
attach whatman sterile filter.

8. Place another needle in the sterile vial to relieve the
pressure.

9. Draw out solution with a Syringe, run though whatman
filter.

10. Take other Syringe with 2ml oil, run through whatman
into solution.

Makes 50 ml @ 100mg/ml

Test Prop for 10 grams

10 grams powder

72.5 ml sesame oil

5ml Benzyl AlcoholA 5%

15ml Benzyl Benzoate 15%

Syringes

Vial

Sterile Vial

Whatman sterile filter

1. Weigh out 10 grams of powder.

2. Place powder in vial.

3. Add BA & BB to the vial.

4. Heat oil in the oven to help sterilize it, heat to at
least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in
a muffin pan, just fill one of the indentions this is plenty for these
experiments. Also heat more oil than you need, as you will not be able to get
it all out of the pan.

5. Add oil to the vial, save 2 ml of oil in the Syringe
for later. Gently shake vial.

6. Heat mixture if necessary. I like heating my powder
products, by placing the vial in a frying pan, and placing it on the eye of the
stove.

7. Place a 18 or 20 gauge needle in the sterile vial
attach whatman sterile filter.

8. Place another needle in the sterile vial to relieve the
pressure.

9. Draw out solution with a Syringe, run though whatman
filter.

10. Take other Syringe with 2ml oil, run through whatman
into solution.

Makes 100 ml @ 100mg/ml

Deca for 5 grams

5 grams powder

18.75ml sesame oil

1.25ml BA 5%

1.25ml BB 5%

Syringes

Vial

Sterile Vial

Whatman sterile filter

1. Weigh out 5 grams of powder.

2. Place powder in vial.

3. Add BA & BB to the vial.

4. Heat oil in the oven to help sterilize it, heat to at
least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in
a muffin pan, just fill one of the indentions this is plenty for these
experiments. Also heat more oil than you need, as you will not be able to get
it all out of the pan.

5. Add oil to the vial, save 2 ml of oil in the Syringe
for later. Gently shake vial.

6. Heat mixture if necessary. I like heating my powder
products, by placing the vial in a frying pan, and placing it on the eye of the
stove.

7. Place a 18 or 20 gauge needle in the sterile vial
attach whatman sterile filter.

8. Place another needle in the sterile vial to relieve the
pressure.

9. Draw out solution with a Syringe, run though whatman filter.

10. Take other Syringe with 2ml oil, run through whatman
into solution.

Makes 25 ml @ 200 mg/ml

Deca for 10 grams

10 grams powder

37.5 ml sesame oil

2.5ml BA 5%

2.5ml BB 5%

Syringes

Vial

Sterile Vial

Whatman sterile filter

1. Weigh out 10 grams of powder.

2. Place powder in vial.

3. Add BA & BB to the vial.

4. Heat oil in the oven to help sterilize it, heat to at
least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in
a muffin pan, just fill one of the indentions this is plenty for these
experiments. Also heat more oil than you need, as you will not be able to get
it all out of the pan.

5. Add oil to the vial, save 2 ml of oil in the Syringe
for later. Gently shake vial.

6. Heat mixture if necessary. I like heating my powder
products, by placing the vial in a frying pan, and placing it on the eye of the
stove.

7. Place a 18 or 20 gauge needle in the sterile vial
attach whatman sterile filter.

8. Place another needle in the sterile vial to relieve the
pressure.

9. Draw out solution with a Syringe, run though whatman
filter.

10. Take other Syringe with 2ml oil, run through whatman
into solution.

Makes 50 ml @ 200 mg/ml

Tren (Powder not pellets) for 5 grams

5 grams tren powder

43.75 ml sesame oil

2.5 ml BA 5%

Syringes 3cc & 5/10cc

18 or 20 guage Needles

Vial

Sterile Vial

Whatman sterile filter

1. Weigh out 5 grams of powder.

2. Place powder in vial.

3. Add BA to the vial.

4. Heat oil in the oven to help sterilize it, heat to at
least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in
a muffin pan, just fill one of the indentions this is plenty for these
experiments. Also heat more oil than you need, as you will not be able to get
it all out of the pan.

5. Add oil to the vial, save 2 ml of oil in the Syringe
for later. Gently shake vial.

6. Heat mixture if necessary. I like heating my powder
products, by placing the vial in a frying pan, and placing it on the eye of the
stove.

7. Place a 18 or 20 gauge needle in the sterile vial
attach whatman sterile filter.

8. Place another needle in the sterile vial to relieve the
pressure.

9. Draw out solution with a Syringe, run though whatman
filter.

10. Take other Syringe with 2ml oil, run through whatman
into solution.

Makes 50 ml @ 100mg/ml

Tren (powder not pellets) for 10 grams

10 grams tren powder

84.5 ml sesame oil

5 ml BA 5%

Syringes 3cc & 5/10cc

18 or 20 guage Needles

Vial

Sterile Vial

Whatman sterile filter

1. Weigh out 10 grams of powder.

2. Place powder in vial.

3. Add BA to the vial.

4. Heat oil in the oven to help sterilize it, heat to at
least 212 degrees F. I usually heat my oil at 275 to be sure, I put the oil in
a muffin pan, just fill one of the indentions this is plenty for these
experiments. Also heat more oil than you need, as you will not be able to get
it all out of the pan.

5. Add oil to the vial, save 2 ml of oil in the Syringe
for later. Gently shake vial.

6. Heat mixture if necessary. I like heating my powder
products, by placing the vial in a frying pan, and placing it on the eye of the
stove.

7. Place a 18 or 20 gauge needle in the sterile vial
attach whatman sterile filter.

8. Place another needle in the sterile vial to relieve the
pressure.

9. Draw out solution with a Syringe, run though whatman
filter.

10. Take other Syringe with 2ml oil, run through whatman
into solution.

Makes 100 ml @ 100mg/ml


Leave a comment

Leave a Comment